Please login to view your shopping cart.
Don't have an account? Create one!

Hardware & Tools

Top Door Casting

Part Number: TP 4680

$11.00 each

In-Stock.Ships via UPS/Fedex

Top door casting for the Sanymetal baked enamel partitions.

TechNotes

Enlargement

Material: chrome plated Zamak (pot metal)
Height, including 'til' at bottom: 3-1/2"
NOTES:
1. This insert is shaped like an 'S'
2. The back, top and bottom edges are rounded on the outside but
   flat on the inside.

Total thickness of back edge: 1/4"

Side walls on middle and lower horizontal pieces:
  Thickness: 1/16"
  Height: 11/32"
The vertical parts are styled so that they have varying widths

Upper vertical section:
  Width at top: 13/16"
  Width of horizontal parts: 1"

Wall of vertical section between the middle and lower horizontal
  pieces: though the back edge material is still 1/4" thick,
  the side edge is wider than the middle and lower horizontal pieces.
  Total width, including back edge thickness: 7/8"

There are holes for the hinge pin in the top, middle and bottom
  horizontal parts of the 'S'. The top and middle holes go all the
  way through the metal. The bottom hole does not - instead, it has
  a side wall then a bevelled bottom, which matches the bevel on the
  TP 7774 nylon hinge pin
    Top and middle hole
      Dia: 3/8"
      Thickness: 3/16"
    Bottom hole
      Dia: 3/8"
      Depth of wall: 1/8"
      Depth in center of hole: 7/32"
    Space between middle horizontal bar to middle horizontal
      bar: 1-1/8"
    Space between middle horizontal piece to lower horizontal
      piece: 5/8"

Top horizontal piece
  Length, including tab: 2"
  Length of tab: 1/4"
Bottom vertical 'tail'
  Length, on outside edge: 1-1/8"
  Length of tab: 1/4"