Please login to view your shopping cart.
Don't have an account? Create one!

Hardware & Tools

Standard Door Kit for Mills Partitions

Part Number: TP MLKIT

$55.50 each

In-Stock.Ships via UPS/Fedex

Mills door kit includes the following parts:
TP 1001/1101ML top & bottom hinge, TP 4260ML bumper/hook, TP 2901ML slide bolt and latch, and TP 3161ML keeper/bumper.

TechNotes

Enlargement

This is a complete door hardware kit for Mills baked enamel partitions. It includes the following parts:
1. TP 1001/1101ML top and bottom hinges with pin and pintel
2. TP 2901ML slide latch
3. TP 3161ML bumper/keeper
4. TP 4260ML bumper hook
5. Mounting hardware

1. Tp 1001/1101ML top and bottom hinge kit. This item comes with
   the top and bottom hinge, hinge pin, bottom pintle on a threaded
   shaft, wiz nut, and mounting hardware

   Top and bottom hinge:
     Material: Chrome plated Zamak (pot metal)
     Height: 2"
     Ears
       Ear thickness: 1/8"
       Face thickness: 5/32"
       Inside depth, from middle of the back of the face
         to end of ear: 1-3/32"
       Distance between ears: 1-9/32"
       Mounting holes
         Dia: 1/4"
         Hole to hole OC: 1-3/8"
         Distance to hole from side edge of ear: 5/32"
         Distance to hole from top or bottom of ear: 3/16"
   Tongue
     Total length, from front of face: 1-13/16"
     Width by hinge pin hole: 1-1/8" in front of face: 1-1/2"
     Thickness: 3/8"
     'A' dimension (from back of face to center of hole
       in tongue): 1/1-4"
     Hole dia on top hinge: 3/8"
     Hole dia on bottom hinge: 7/16"
   Top hinge pin
     Dia
       Wide section: 3/8"
       Narrow section: 3/16"
     Length
       Wide section: 3-1/32"
       Narrow section: 19/32"
     Total length of pin: 3-5/8"
     There is a cutout near the top of the pin
       Width: 3/32"
       Depth: 1/16"
       Distance to cutout tip of pin: 1/8"
   Bottom pintle with pin - this part consists of a removable
     nylon pintle and a steel shaft
       Pintle part
         Material: black nylon
         Height to top of point: 1-3/8"
         Outside dia: 3/4"
         Inside dia: 11/32"
         Thickness of wall: 3/16"
       Shaft - part long and round, part Hex, part threaded
         Round part
           Material: steel
           Dia: 11/32"
           Length: 2"
         Hex part (part of shaft does not move)
           Width: 7/16"
           Length: 9/16"
         Threaded area:
           Thread type: 3/8-16
           Length: 1/2"
           Total length of shaft: 3-1/8"
         Wiz nut
           Height: 11/32"
           Hex dia: 9/16"
           Outside dia: 3/4"
           Thread size: 38-16

2. TP 2901ML slide latch
   Material: chrome plated Zamak
   Width: 1-3/4"
   Height: 1-3/8"
   Thickness of outer rim: 1/8"
   Moveable slide handle
     Base width: 1-3/16"
     Base height: 1-1/8"
     Handle thickness: 1/4"
   Escutcheon plate
     Mounting holes
       Screw hole type: countersunk machine
       Dia: 1/8"
       Hole to hole OC: 3/4"
       Distance to either hole from top or bottom edge: 1/4"
       Distance to either hole from either side:25/32"
     Slide bolt
       Dia: 3/8"
       Length: 11/16"
       Movement distance: 5/16"
       Screws (provided)
         Qty: 2 each
         Type: 5-0 x 5/8" Torx countersunk machine screw

3. TP 3161ML bumper/keeper
   Material: chrome plated Zamak
   Mounting plate
     Thickness: 1/8"
     Width, not including bumper: 27/32"
     Width, including bumper: 1/2"
     Height: 2-1/4"
     Bumper housing
       Width: 7/16"
       Height: 5/8"
       Height off mounting surface: 15/16"
   Bumper
     Material: black rubber
     Dia: 1/2"
     Thickness of material that clears housing: 3/32"
   Mounting holes
     Dia: 1/4"
     Hole to hole OC: 1-5/8"
     Distance to either hole from top or bottom: 3/16"
     Distance to either hole from either side: 5/16"
   Keeper hole
     Width: 7/16"
     Height: 27/32"

4. TP 4260M bumper hook
   Material: chrome plated Zamak
   Base is triangular in shape
     Width at top, by mounting holes:1-1/2"
     Width at bottom, Y mounting hole: 9/16"
     Thickness: 1/16"
     Height of raised front surface from mounting surface: 1/4"
   Mounting holes
     Qty: 3 each at the top, 1 each at the bottom
     Dia: 13/64"(between 3/1" and 7/32")
     Top hole to top hole OC: 7/8"
     Top hole to bottom hole OC: 1-15/16"
   Top bumper hook
     Dia of narrow part: 11/32"
     Dia of wide part that holds bumper: 5/8"
     Length, from front surface, including bumper: 3-11/32"
   Lower hook
     Dia: 1/4"
     Length on the inside angle: 7/8"
     Angle: approximately 30 degress (28 actual)
   Bumper
     Material: black rubber
     Dia: 1/2"
     Thickness: 13/32"

Mounting hardware included:
  4 each TP 302 One-way shoulder bolt for top and bottom hinge
  4 each TP 301 One-way barrel nut for top and bottom hinge
  3 each #10 x 5/8" One way round head sheet metal screw
    for TP 4260 bumper hook
  2 each #8 x 5/8" Torx countersunk sheet metal screw
    for TP 3161ML bumper/keeper
  2 each 5-40 x 5/8" Torx countersunk machine screw
    for connecting the side plate and escutcheon plate
    of the TP 2901Ml slide latch