Please login to view your shopping cart.
Don't have an account? Create one!
Don't have an account? Create one!
ADA Door Hardware Kit
Part Number: TP GLOKITBEADA
$54.00 each
- In-Stock.Ships via UPS/Fedex
Replacement hardware kit for a Global ADA door.
This is a kit that includes all of the hardware necessary to hang
either a standard or an ADA door. It is made to fit round edge,
steel partitions: 1-1/4" thick pilasters and 1" thick doors.
There are two sets of hardware, listed below. Technical information
follows in the same order:
Set 1 includes:
- Top hinge
- Top hinge pin, nylon
- Bottom hinge with pintle, lock washers and nut
- Bottom door cam
- Coat hook with bumper
- Turn knob set for standard door
- Strike/keeper
- Mounting hardware
Set 2 includes ADA supplementals:
- Top hinge pin, stainless steel
- Turn knob set with paddle handle for ADA door
- Pull handle
- Wall bumper
- Mounting hardware
SET 1
Top hinge
Brand: Global
Application: Used on a 1-1/4" thick, round edged
metal pilaster and a 1" thick, round edge metal door
'A' Dimension (distance from back face of U-bracket
to center of hinge pin hole: 1-1/8"
This part consists of:
- A U-Bracket with holes for mounting to a pilaster
- A tongue with hinge pin hole and bushing
U-Bracket
Material: Chrome plated zamak
Material thickness: 7/64" (between 3/32" and 1/8")
Height: 2-3/16"
Width
Inside: 1-17/64" (between 1-1/4" and 1-9/32")
Outside: 1-15/32"
Depth:
Inside, at center: 31/32"
Outside: 1-1/16"
Mounting holes
Qty: 2 per fork
Dia: 9/32"
Hole to hole OC: 1-1/2"
Distance from back face of fork to center of hole: 7/32"
Tongue
Distance from back face of U-bracket to center of
hinge pin hole ('A' dimension): 1-1/8"
Height
At hinge pin hole: 1/2"
At face of U-bracket: 9/16"
Length, to front face of U-bracket: 1-5/8"
Width
At U-bracket: 1-1/32"
At hinge pin hole: 15/16"
Hinge pin hole
Including bushing: 13/32"
Not including bushing: 39/64" (between 19/32" and 5/8")
Bushing
Material: White nylon
Thickness: 5/64"
Top hinge pin
Style: The top end has a deep inside hole for inserting a
screw to back the pin out. The bottom is a smaller diameter
than the rest of the pin and has a snap-in locking tip.
Material: White nylon
Overall length: 3-15/32"
Upper portion
Length: 2-23/32"
Dia: 3/8"
Hole
Dia: 13/64" (between 3/16" and 7/32")
Length: 17/32"
Lower portion with locking tip
Length: 3/4"
Dia: 5/32" - 3/16"
Grooves
Length: 3/16"
Distance between grooves: 1/64"
Threads
Thread size: 10-24
Depth: 11/16"
Bottom hinge with pintle, lock washers and nut
Material: Chrome plated zamak
'A' Dimension (distance from back face of U-bracket
to center of hinge pin hole): 1-1/8"
The hinge consists of:
- A U-Bracket with holes for mounting to a pilaster
- A tongue with a pintle hole
U-Bracket
Material thickness: 7/64" (between 3/32" and 1/8")
Height: 2-3/16"
Width
Inside: 1-17/64" (between 1-1/4" and 1-9/32")
Outside: 1-15/32"
Depth:
Inside, at center: 31/32"
Outside: 1-1/16"
Mounting holes
Qty: 2 per fork
Dia: 9/32"
Hole to hole OC: 1-1/2"
Distance from back of fork to center of hole: 7/32"
Tongue
Distance from back face of U-bracket to center of
hinge pin hole ('A' dimension): 1-1/8"
Height
At pintle hole: 1/2"
At U-bracket: 9/16"
Length, to front face of U-bracket: 1-5/8"
Width
At hinge pintle hole: 15/16"
At U-bracket: 1"
Pintle hole
Dia: 11/32"
Distance from hole center to outer tip of tongue: 19/32"
Pintle - includes an internal and an external tooth washer
and a nut. It has a slanted upper nylon portion and a
lower threaded steel portion with an adjustment slot
at the tip
Material
Upper: Nylon
Lower: Steel, bright finish
Upper nylon portion
Dia: 21/32"
Height
At tallest point: 1-1/8"
At shortest point: 11/16"
Lower threaded portion
Overall length: 1-1/32"
Thread size: 5/16-18 x 9/16"
Adjustment slot
Width: 1/32"
Length: 7/32"
Depth: 3/32"
Upper external tooth washer
Material: Steel
Thickness: 1/32"
Diameter
Inside: 11/32"
Outside: 9/16"
Lower internal tooth washer
Material: Steel
Thickness: 1/32"
Diameter
Inside: 11/32"
Outside: 19/32"
Hex nut
Material: Steel
Size: 5/16-18
Outside drive: 1/2"
Bottom door cam - This item is:
- Square on the outside, has a rectangular base and outer tabs
on the outside that lock into the bottom door casting,
preventing rotation
- Round on the inside with a beveled ceiling that mirrors the
top of the pintle (see lower door hinge)
Material: White nylon
Material thickness: 1/8"
Overall height: 1-1/4"
Outside section
Upper square portion
Height: 1-1/8"
Width/depth: 27/32"
Lower base
Thickness: 1/8"
Length: 1-3/32"
Width: 7/8"
Locking tabs
Depth off surface of square portion: 7/64"
Width: 9/32"
Height from base
Side 1: 11/32"
Side 2: 27/32"
Inside portion
Diameter: 23/32"
Height
At tallest portion: 1-1/16"
At shortest portion: 5/8"
Coat hook with bumper - consists of a mounting plate,
straight upper hook with bumper and curved lower hook
Material: Chrome plated zamak with black rubber bumper
Mounting plate
Thickness: 3/32"
Width: 1-11/32"
Height: 2"
Mounting holes
Qty: 2
Dia: 7/32"
Hole to hole OC: 7/8"
Straight upper hook with bumper
Overall length, from back of mounting plate: 3-1/16"
Diameter
At mounting plate: 9/32"
At bumper: 9/16"
Bumper
Length: 7/16"
Dia: 9/16"
Curved lower hook
Hook dia: 1/4"
Inside dia of curve: 1-1/16"
Distance from the top of the curved hook to the bottom
of the upper straight hook
From the highest portion of curve: 5/8"
From the lowest portion of curve: 1-1/4"
Turn knob - consists of an inner turn knob and an outer
escutcheon plate
Material: Chrome plated zamak
Inner turn knob - female portion
Handle
Shape: Bow tie, with hole in the center for
shoulder screw (included - see 'Mounting Hardware')
Depth off surface of mounting plate: 15/32"
Outside dia: 1-19/32"
Diameter of door hole it fits: 1-1/4"
Diameter of center hole in bow tie handle: 9/32",
with a 15/32" cutout at the top for the head of a screw
Outer escutcheon plate (male portion)
Outer plate
Outside features
- All-American's name is stamped on it
- Emergency access slot
Outside dia: 1-5/8"
Diameter of door hole it fits: 1-1/4"
Overall thickness/depth: 13/32"
Posts - there is a tall, threaded center post with tension
spring and a short outside post with locking nipple
Center to outside post OC: 3/8"
Threaded center post
Length, from inside of outer plate
Overall: 7/8"
Lower portion only: 5/8"
Upper portion only: 1/4"
Outside diameter
Lower portion: 3/8"
Upper portion: 1/4"
Thread size: 10-24 x 1/2"
Outside post
Length, from inside of outer plate
Overall: 9/16"
Lower portion only: 7/16"
Upper portion only: 1/8"
Outside diameter
Lower portion: 11/32"
Upper locking nipple: 5/32"
Strike/Keeper - consists of
- A U-bracket with mounting forks and a face plate that has
a keeper hole
- A bumper plate, in-line with the forks
Material: Chrome plated zamak, with black rubber bumper
Mounting forks
Height: 1-3/16
Thickness: 1/8"
Inside length, in the center: 1-3/32"
Distance between forks: 1-9/32"
Mounting holes
Qty: 1 per fork
Dia: 9/32"
Distance from side edge of fork to hole center: 7/16"
Face plate
Thickness: 7/64" (between 3/32" and 1/8")
Height: 1-3/16"
Keeper hole
Shape: Rectangular, with radius corners
Height: 25/32"
Width: 15/32"
Bumper plate
Thickness, not including bumper: 3/8"
Height: 1-3/16"
Projection off front of face plate: 1-1/16"
Bumper
Shape: Doughnut
Outside dia: 25/32"
Inside dia: 11/32"
Thickness off plate surface: 5/32"
Mounting hardware is provided, and includes:
For the top and bottom hinges and the strike keeper:
- 5 Ea 10-24 x 1-5/16" Torx shoulder screw, zinc plated steel
- 5 Ea 10-24 x 5/8" Torx barrel nut, zinc plated steel
For the turn knob and escutcheon plate:
- 1 Ea 10-24 x 1/2" Torx shoulder screw, stainless steel
For the coat hook with bumper:
- 2 Ea #12 x 5/8" Torx tapping screw, zinc plated steel
SET2
Top hinge pin, stainless steel
Style: The top end has a threaded hole for inserting a screw
to back the pin out. The bottom is a smaller diameter
than the rest of the pin and has a snap-in locking tip.
Material: Stainless steel
Overall length: 3-15/32"
Upper portion
Length: 2-23/32"
Dia: 3/8"
Hole
Dia: 13/64" (between 3/16" and 7/32")
Length: 17/32"
Lower portion with locking tip
Length: 3/4"
Dia: 5/32" - 3/16"
Threads
Thread size: 10-24
Depth: 3/4"
ADA Turn knob with paddle handle for ADA door -
female portion only (male escutcheon plate is included in Set 1)
Material: Chrome plated zamak
Outer circular plate
Outside dia: 1-19/32"
Diameter of door hole it fits: 1-1/4"
Depth: 5/16"
Paddle handle
Height: 3"
Width: 3/8"
Depth
At circular plate: 1-3/16"
At tail: 31/32"
Depth of space between tail and door when installed: 3/16"
Mount style: Comes with shoulder screw for mounting
to escutcheon plate (see 'Mounting Hardware' for this set)
Size of center hole in handle
Outside: 5/8" dia
Inside hole
Upper (for screw head to set): 1/2" dia x 13/16" deep
Lower (for screw shoulder to set): 9/32" dia x 17/32" deep
Pull handle
Material: Chrome plated zamak
Width, on the outside: 9/16"
Length
Inside: 3-1/8"
Outside: 4-11/16"
Height
Inside: 13/16"
Outside: 31/32"
Mounting holes
Type: 10-24 x 11/16" deep
Hole to hole OC: 3-1/2"
Wall bumper
Material: Chrome plated zamak with black rubber bumper Overall length, from mounting surface to bumper tip: 2"
Stem with rubber tip
Diameter: 5/16"
Rubber tip
Dia: 9/16"
Depth: 7/16"
Base
Dia: 2"
Thickness: 1/8"
Mounting holes
Qty: 2 each
Dia: 7/32"
Hole to hole OC: 1-1/4"
Mounting hardware
For the pull handle
- 2 Ea 10-24 x 1-1/4" Torx shoulder screw, zinc plated steel
For the turn knob and escutcheon plate:
- 1 Ea 10-24 x 1/2" Torx shoulder screw, stainless steel
either a standard or an ADA door. It is made to fit round edge,
steel partitions: 1-1/4" thick pilasters and 1" thick doors.
There are two sets of hardware, listed below. Technical information
follows in the same order:
Set 1 includes:
- Top hinge
- Top hinge pin, nylon
- Bottom hinge with pintle, lock washers and nut
- Bottom door cam
- Coat hook with bumper
- Turn knob set for standard door
- Strike/keeper
- Mounting hardware
Set 2 includes ADA supplementals:
- Top hinge pin, stainless steel
- Turn knob set with paddle handle for ADA door
- Pull handle
- Wall bumper
- Mounting hardware
SET 1
Top hinge
Brand: Global
Application: Used on a 1-1/4" thick, round edged
metal pilaster and a 1" thick, round edge metal door
'A' Dimension (distance from back face of U-bracket
to center of hinge pin hole: 1-1/8"
This part consists of:
- A U-Bracket with holes for mounting to a pilaster
- A tongue with hinge pin hole and bushing
U-Bracket
Material: Chrome plated zamak
Material thickness: 7/64" (between 3/32" and 1/8")
Height: 2-3/16"
Width
Inside: 1-17/64" (between 1-1/4" and 1-9/32")
Outside: 1-15/32"
Depth:
Inside, at center: 31/32"
Outside: 1-1/16"
Mounting holes
Qty: 2 per fork
Dia: 9/32"
Hole to hole OC: 1-1/2"
Distance from back face of fork to center of hole: 7/32"
Tongue
Distance from back face of U-bracket to center of
hinge pin hole ('A' dimension): 1-1/8"
Height
At hinge pin hole: 1/2"
At face of U-bracket: 9/16"
Length, to front face of U-bracket: 1-5/8"
Width
At U-bracket: 1-1/32"
At hinge pin hole: 15/16"
Hinge pin hole
Including bushing: 13/32"
Not including bushing: 39/64" (between 19/32" and 5/8")
Bushing
Material: White nylon
Thickness: 5/64"
Top hinge pin
Style: The top end has a deep inside hole for inserting a
screw to back the pin out. The bottom is a smaller diameter
than the rest of the pin and has a snap-in locking tip.
Material: White nylon
Overall length: 3-15/32"
Upper portion
Length: 2-23/32"
Dia: 3/8"
Hole
Dia: 13/64" (between 3/16" and 7/32")
Length: 17/32"
Lower portion with locking tip
Length: 3/4"
Dia: 5/32" - 3/16"
Grooves
Length: 3/16"
Distance between grooves: 1/64"
Threads
Thread size: 10-24
Depth: 11/16"
Bottom hinge with pintle, lock washers and nut
Material: Chrome plated zamak
'A' Dimension (distance from back face of U-bracket
to center of hinge pin hole): 1-1/8"
The hinge consists of:
- A U-Bracket with holes for mounting to a pilaster
- A tongue with a pintle hole
U-Bracket
Material thickness: 7/64" (between 3/32" and 1/8")
Height: 2-3/16"
Width
Inside: 1-17/64" (between 1-1/4" and 1-9/32")
Outside: 1-15/32"
Depth:
Inside, at center: 31/32"
Outside: 1-1/16"
Mounting holes
Qty: 2 per fork
Dia: 9/32"
Hole to hole OC: 1-1/2"
Distance from back of fork to center of hole: 7/32"
Tongue
Distance from back face of U-bracket to center of
hinge pin hole ('A' dimension): 1-1/8"
Height
At pintle hole: 1/2"
At U-bracket: 9/16"
Length, to front face of U-bracket: 1-5/8"
Width
At hinge pintle hole: 15/16"
At U-bracket: 1"
Pintle hole
Dia: 11/32"
Distance from hole center to outer tip of tongue: 19/32"
Pintle - includes an internal and an external tooth washer
and a nut. It has a slanted upper nylon portion and a
lower threaded steel portion with an adjustment slot
at the tip
Material
Upper: Nylon
Lower: Steel, bright finish
Upper nylon portion
Dia: 21/32"
Height
At tallest point: 1-1/8"
At shortest point: 11/16"
Lower threaded portion
Overall length: 1-1/32"
Thread size: 5/16-18 x 9/16"
Adjustment slot
Width: 1/32"
Length: 7/32"
Depth: 3/32"
Upper external tooth washer
Material: Steel
Thickness: 1/32"
Diameter
Inside: 11/32"
Outside: 9/16"
Lower internal tooth washer
Material: Steel
Thickness: 1/32"
Diameter
Inside: 11/32"
Outside: 19/32"
Hex nut
Material: Steel
Size: 5/16-18
Outside drive: 1/2"
Bottom door cam - This item is:
- Square on the outside, has a rectangular base and outer tabs
on the outside that lock into the bottom door casting,
preventing rotation
- Round on the inside with a beveled ceiling that mirrors the
top of the pintle (see lower door hinge)
Material: White nylon
Material thickness: 1/8"
Overall height: 1-1/4"
Outside section
Upper square portion
Height: 1-1/8"
Width/depth: 27/32"
Lower base
Thickness: 1/8"
Length: 1-3/32"
Width: 7/8"
Locking tabs
Depth off surface of square portion: 7/64"
Width: 9/32"
Height from base
Side 1: 11/32"
Side 2: 27/32"
Inside portion
Diameter: 23/32"
Height
At tallest portion: 1-1/16"
At shortest portion: 5/8"
Coat hook with bumper - consists of a mounting plate,
straight upper hook with bumper and curved lower hook
Material: Chrome plated zamak with black rubber bumper
Mounting plate
Thickness: 3/32"
Width: 1-11/32"
Height: 2"
Mounting holes
Qty: 2
Dia: 7/32"
Hole to hole OC: 7/8"
Straight upper hook with bumper
Overall length, from back of mounting plate: 3-1/16"
Diameter
At mounting plate: 9/32"
At bumper: 9/16"
Bumper
Length: 7/16"
Dia: 9/16"
Curved lower hook
Hook dia: 1/4"
Inside dia of curve: 1-1/16"
Distance from the top of the curved hook to the bottom
of the upper straight hook
From the highest portion of curve: 5/8"
From the lowest portion of curve: 1-1/4"
Turn knob - consists of an inner turn knob and an outer
escutcheon plate
Material: Chrome plated zamak
Inner turn knob - female portion
Handle
Shape: Bow tie, with hole in the center for
shoulder screw (included - see 'Mounting Hardware')
Depth off surface of mounting plate: 15/32"
Outside dia: 1-19/32"
Diameter of door hole it fits: 1-1/4"
Diameter of center hole in bow tie handle: 9/32",
with a 15/32" cutout at the top for the head of a screw
Outer escutcheon plate (male portion)
Outer plate
Outside features
- All-American's name is stamped on it
- Emergency access slot
Outside dia: 1-5/8"
Diameter of door hole it fits: 1-1/4"
Overall thickness/depth: 13/32"
Posts - there is a tall, threaded center post with tension
spring and a short outside post with locking nipple
Center to outside post OC: 3/8"
Threaded center post
Length, from inside of outer plate
Overall: 7/8"
Lower portion only: 5/8"
Upper portion only: 1/4"
Outside diameter
Lower portion: 3/8"
Upper portion: 1/4"
Thread size: 10-24 x 1/2"
Outside post
Length, from inside of outer plate
Overall: 9/16"
Lower portion only: 7/16"
Upper portion only: 1/8"
Outside diameter
Lower portion: 11/32"
Upper locking nipple: 5/32"
Strike/Keeper - consists of
- A U-bracket with mounting forks and a face plate that has
a keeper hole
- A bumper plate, in-line with the forks
Material: Chrome plated zamak, with black rubber bumper
Mounting forks
Height: 1-3/16
Thickness: 1/8"
Inside length, in the center: 1-3/32"
Distance between forks: 1-9/32"
Mounting holes
Qty: 1 per fork
Dia: 9/32"
Distance from side edge of fork to hole center: 7/16"
Face plate
Thickness: 7/64" (between 3/32" and 1/8")
Height: 1-3/16"
Keeper hole
Shape: Rectangular, with radius corners
Height: 25/32"
Width: 15/32"
Bumper plate
Thickness, not including bumper: 3/8"
Height: 1-3/16"
Projection off front of face plate: 1-1/16"
Bumper
Shape: Doughnut
Outside dia: 25/32"
Inside dia: 11/32"
Thickness off plate surface: 5/32"
Mounting hardware is provided, and includes:
For the top and bottom hinges and the strike keeper:
- 5 Ea 10-24 x 1-5/16" Torx shoulder screw, zinc plated steel
- 5 Ea 10-24 x 5/8" Torx barrel nut, zinc plated steel
For the turn knob and escutcheon plate:
- 1 Ea 10-24 x 1/2" Torx shoulder screw, stainless steel
For the coat hook with bumper:
- 2 Ea #12 x 5/8" Torx tapping screw, zinc plated steel
SET2
Top hinge pin, stainless steel
Style: The top end has a threaded hole for inserting a screw
to back the pin out. The bottom is a smaller diameter
than the rest of the pin and has a snap-in locking tip.
Material: Stainless steel
Overall length: 3-15/32"
Upper portion
Length: 2-23/32"
Dia: 3/8"
Hole
Dia: 13/64" (between 3/16" and 7/32")
Length: 17/32"
Lower portion with locking tip
Length: 3/4"
Dia: 5/32" - 3/16"
Threads
Thread size: 10-24
Depth: 3/4"
ADA Turn knob with paddle handle for ADA door -
female portion only (male escutcheon plate is included in Set 1)
Material: Chrome plated zamak
Outer circular plate
Outside dia: 1-19/32"
Diameter of door hole it fits: 1-1/4"
Depth: 5/16"
Paddle handle
Height: 3"
Width: 3/8"
Depth
At circular plate: 1-3/16"
At tail: 31/32"
Depth of space between tail and door when installed: 3/16"
Mount style: Comes with shoulder screw for mounting
to escutcheon plate (see 'Mounting Hardware' for this set)
Size of center hole in handle
Outside: 5/8" dia
Inside hole
Upper (for screw head to set): 1/2" dia x 13/16" deep
Lower (for screw shoulder to set): 9/32" dia x 17/32" deep
Pull handle
Material: Chrome plated zamak
Width, on the outside: 9/16"
Length
Inside: 3-1/8"
Outside: 4-11/16"
Height
Inside: 13/16"
Outside: 31/32"
Mounting holes
Type: 10-24 x 11/16" deep
Hole to hole OC: 3-1/2"
Wall bumper
Material: Chrome plated zamak with black rubber bumper Overall length, from mounting surface to bumper tip: 2"
Stem with rubber tip
Diameter: 5/16"
Rubber tip
Dia: 9/16"
Depth: 7/16"
Base
Dia: 2"
Thickness: 1/8"
Mounting holes
Qty: 2 each
Dia: 7/32"
Hole to hole OC: 1-1/4"
Mounting hardware
For the pull handle
- 2 Ea 10-24 x 1-1/4" Torx shoulder screw, zinc plated steel
For the turn knob and escutcheon plate:
- 1 Ea 10-24 x 1/2" Torx shoulder screw, stainless steel
