• Print this page
• Email a friend

General description: Eclipse electric hand dryer
Manufacturer: Bobrick
Shipping information: 31 lbs, ships via UPS
Warranty: From date of purchase:
- Motor brushes: 3 years
- All other parts 10 years
Motor specifications: 115 volts, 20 amps, 2300 watts, 50/60 Hz,
  single phase, UL/c-UL listed, VDE Approved with CE Marking
Material
  Cover: One-piece, deep drawn, 16 gauge steel
  Finish: Polished chrome plate
  Mounting base: 16 gauge thick plated-steel
Size
  Height, at highest point: 8-7/8""
  Width, at widest point: 15-7/16"
  Depth, at deepest point: 7-9/16"
  Mounting holes:
    Qty: 4
    Dia: 1/4"
  Electrical wiring hole dia: 7/8"
Features:
- Vandal-resistant, pressure die-cast aluminum air inlet/outlet
  grille with infrared sensor and operational graphics
- Fan: Dynamically balanced, single inlet, directs air flow in a
  wide band through heating element at 105 cfm
- Motor: Universal, 1/10 hp, 6200 rpm with sealed ball bearing at
  drive shaft end and self-lubricating sleeve bearing at non-drive
  end. Equipped with automatic thermal-overload switch.
- Heating element: coiled nickel-chrome wire is mounted on mica
  formers and protected by a thermal fuse. Black, injection molded
  ABS element housing is mounted on the fan inlet, heats air without
  hot spots and is inaccessible to vandals.
- Electronic control: Infrared automatic sensor automatically turns
  dryer on when hands are held under air-outlet opening and across
  path of sensor. Remove hands from path of sensor and dryer stops.
  Electronic sensor has automatic shutoff approximately 1-1/2
  minutes after dryer turns on if an inanimate object, such as tape
  or chewing gum, is placed across sensor lens. After inanimate
  object is removed, electronic sensor automatically resets itself
  and dryer operates normally.

You may visit www.bobrick.com for more information,
  installation instructions, recommended mounting heights
  Barrier Free Guidelines and more.