Don't have an account? Create one!

Locker Hardware & Tools

Fits Republic Locker Complete Handle Assy, RH, 1965 - Present

Part Number: RS-1105-RH

$3.56 each

In-Stock.Ships via UPS/Fedex

Replacement handle assembly for Republic Steel lockers. Complete with lift (#RS-1198), housing (#RS-1197) and screws.

TechNotes

Enlargement

Material
  Lift and housing: Zinc die-cast, chrome plated
  Bumper for lift: Gray, non-marking rubber
Lift
  Height
    Upper grip (textured half): 15/16"
    Lower half: 1-5/16"
    Both parts: 2-1/2"
  Depth
    Upper half
      Including mounting pegs: 1-1/2"
      Not including mounting pegs: 11/16"
    Lower half
      Including mounting pegs: 1-9/32"
      Not including mounting pegs: 9/16"
  Thickness
    Top and back edge: 5/16"
    Textured grip on upper half: 3/32"
  Grip style: 1/16" Concave squares
  There are flat platforms that lay between, and perpendicular to
    the grip handle and mounting pegs, forming a base and stop
    for the mounting pegs. The flat platforms butt up against
    the outside of the door when the handle is in place. The
    mounting pegs extend back off the platforms, then to the left
    on a 90o bend and into the side of the lockbar.
      Platforms
        Qty: 2 Each, 1 under each mounting peg
        Width: 5/16"
        Length: 9/16"
        Thickness: 3/32"
      Mounting pegs
        Qty: 2 Each
        Length
          To center of bend, from the platform: 7/16"
          From the center of the bend to the tip: 11/32"
        Height
          At platform: 3/8"
          At tips: 5/16"
        Width: 3/16"
        Peg to peg OC: 1-1/8"
  There are two bumpers, one between each platform and the
    handle portion, which act to keep the lift portion from
    'clanging' against the housing as it moves up and down.
      Width: 9/32"
      Height: 1/4"
      Depth: 3/16"
  Padlock hole dia: 3/8"
Housing
  Thickness: varies, from 1/32" to 1/8" around the
    different parts of the housing
  Height: 3-13/16"
  Width - wider at the top than the bottom
    Base - wider in back than in front
      Front
        Top: 13/16"
        Bottom: 9/16"
      Back
        Top: 29/32"
        Bottom: 5/8"
    Kick-proof hood
      Front: 15/32"
      Back, where it joins base: 1/2"
  Lift slot
    Width: 13/32"
    Depth (open top of hood): 1/2"
    Height (front of base): 7/8"
  Mounting hole
    Qty: 2 each - top hole is exposed, and accessible from
      the front of the housing, the bottom hole is concealed
      on the front and accessible only from the back.
    Dia: 1/8"
    Hole to hole OC: 2-7/16"
    Distance to center of top hole from top edge of housing: 5/8"
    Distance to center of bottom hole from bottom edge of
      housing: 23/32"
  Padlock hole dia: 3/8"
Mounting hardware (for housing)
  2 Each 8-32 X 5/16" Phillips head sems screw