Don't have an account? Create one!

Locker Hardware & Tools

Republic Locker Recessed Handle Cup

Part Number: RS-2007

$9.82 each : 1-99
$9.50 each : 100-199
$9.20 each : 200+

In-Stock.Ships via UPS/Fedex

Replacement recessed handle cup for Republic Steel locker.

TechNotes

Enlargement

Material: brushed steel
Thickness: 1/64", 21 gauge
Height
  Outside: 5-17/32"
  Inside: 5-1/32"
Width
  Outside
    At top: 3-15/16"
    At bottom: 3-5/16"
  Inside
    At top: 3-3/8"
    At bottom: 2-27/32"
Depth: 1-1/8"
Front edge width: 1/4"
There are four triangular shaped tabs behind the face trim,
  one behind each corner, which hold the cup in the locker door.
    Height of top tabs: 1/8"
    Height of bottom tabs: 1/16"
There are two mounting holes on the inside bottom ledge onto which
  the number plate is mounted
    Dia of each: 1/8"
    Hole to hole OC: 1-7/8"
There are holes on the back wall, into which a built-in combination
  lock is mounted
    Qty: 3 each, 1 each large in the center,
      2 each small: 1 above and 1 below the large hole
    Dia
      Small hole: 7/32"
      Large hole: 21/32"
    Hole to hole OC
      Small hole to large hole: 1-3/64"
      Small hole to small hole: 2-3/1"
      Distance from bottom ledge to edge of bottom hole: 5/8"
      Distance from top ledge to edge of top hole: 1-11/16"
There is a slot at the top of the cup into which the plastic trigger
  portion of the RS-2008-RH or RS-2009-LH lift fits
    Width
      At back wall: 5/16"
      At top ledge: 9/16"
    Height at back wall: 29/32"
    Depth at top ledge: 1-1/32"