Don't have an account? Create one!

Locker Hardware & Tools

Penco Style Locker Handle, Lift Style

Part Number: PN-3309

$3.93 each

Ships via UPS/Fedex

Complete replacement locker lift handle for Penco Vangard series lockers.

TechNotes

Enlargement

This is an assembly, which includes:
  PN-3388 Housing
  PN-3399 Lift
  PN-3313 Palnut
Material: chrome plated Zamak (pot metal)
Housing (PN-3388)
  Backplate
    Height
      Including tab at bottom: 3-11/16"
      Not including tab: 3-5/8"
    Width
      At top: 13/16"
      At bottom: 11/16"
  Tab
    Height: 3/8"
    Width: 5/16"
    Thickness: 5/32"
    Projection past bottom edge of backplate: 3/16"
  Mounting peg (projects out of the upper back portion
    of the backplate and receives a palnut, which helps
    hold the housing on the locker door)
      Dia: 3/16"
      Length: 1/2"
  Lift slot
    Width: 5/32"
    Height
      Not including tab at top and bottom of slot: 5/16"
      Including tabs: 1-7/8"
  Upper front molding is bevelled on all four sides
    Width
      Where it meets the backplate: 13/16"
      At the top of the face: 11/32"
    Height
      Where it meets the backplate: 1-3/32"
      At the top of the face: 3/4"
  Lower slot tabs
    Width of both tabs and slot: 5/16"
    Thickness of each tab: 1/16"
    Height
      Where it meets the backplate: 7/16"
      At the top of the face: 9/32"
    Depth
      Including backplate: 13/16"
      Not including backplate: 5/8"
  Padlock hole
    Dia: 5/16"
    Type: Countersunk on the outside of each tab slot
Lift (PN-3399)
  General shape - A straight, flat and wide handle on the front
    and top; a flat plate of metal behind and perpendicular to
    the face of the handle, with a variety of curves along its
    bottom and side edges
  Handle
    Width: 7/16"
    Height: 1-3/32"
    Thickness: 3/32"
    Top, which has a shape like a short wind bottle - fat at the
      bottom, where it meets the side handle, angled down to a
      narrow 'neck', which becomes the same thickness as the rest
      of the lift.
        Width
          At front, where it meets the handle: 7/16"
          At the back, where it meets the lift: 1/8"
        Length: 3/4"
        Thickness: 1/8"
  Back plate - the curves on the back edge of the left create a tab
  and a fork to serve the following purposes:
    The tab, located on the back upper part of the lift is shaped
      like a finger that is bent to a 'pointing' up position.
      When the left is pulled out it pivots downward on the forks
      (see below). This finger stops against the locker door,
      keeping the lift from pulling all of the way out of the housing
    The two-pronged forkshape, rounded at the tips, extends down and
      out of the lower section of the lift and fits onto the lockbar,
      becoming the pivoting point when the lift is pulled out.
        Base of finger bend to fork slot OC: 1-9/16"
  Padlock hole dia: 5/16"
Palnut (PN-3390)
  Outside dia: 19/32"
  Depth: 1/4"
  Hole dia: 7/32"
  Hex
    Width: 7/16"
    Thickness: 1/64"
  Color: dark gold