Please login to view your shopping cart.
Don't have an account? Create one!

Locker Hardware & Tools

Complete Locker Handle, Right Hand, Lyon, Post 1981

Part Number: LY-2232-RH

$6.95 each

In-Stock.Ships via UPS/Fedex

Complete locker lift handle assembly for a right hand locker. Post 1981 style.

TechNotes

Enlargement

Material: Chrome plated Zamak
Thickness: Varies, from 1/16" to 1/8"

Lift - broken down into the following portions:
  - Upper 'grip' portion
  - Lower portion with padlock hole
  - Lockbar fingers
  Height of upper and lower sections combined
    At front of handle: 2-1/2"
    At back of handle: 3-3/16"
    Upper grip portion
      Front: 1-3/16"
      Back: 1-5/8"
    Lower padlock portion
      Front: 1-5/16"
      Back: 1-17/32"
  Depth
    Grip portion
      Not including lockbar fingers: 11/16"
      Including lockbar fingers: 1-3/8"
    Padlock portion
      Not including lockbar fingers: 11/16"
      Including lockbar fingers: 1-9/32"
  Lockbar fingers - come out from the handle portion, then
    take a 90o bend to the left - this portion is where you
    identify the handing. The bent portion fits into
    the lockbar. In addition, at the base of each finger
    are platforms that lay between, and perpendicular to
    the handle portion and mounting fingers. These platforms
    butt up against the outside of the door when the
    handle is in place, acting like a stop.
      Length from handle to bend, including platforms: 11/16"
      Length from bend to tip that goes in lockbar: 9/16"
      Height - there are three
      - Between the handle and 90o bend: 5/16"
      - The 90o bend portion - the first half, closest to
        the bemd. extemds down past the half by the tip.
        This extra material acts as a stop for the fingers,
        and it butts up against the lockbar when the fingers
        are in place.
          Height of first half: 1/2"
          Height of second half, at tip: 19/64"
            (between 9/32" and 5/16")
      Center of top finger to center of bottom finger: 11/16"
  Padlock hole dia: 3/8"

Housing
  Front of base
    Height
      At the back: 4-1/6"
      At the front: 3-3/4"
    Width
      At the back: 1-1/32"
      At the front
        Top and bottom portions: 3/4"
        By the lift slot hole: 19/32"
  Mounting
    At the top - on the back of base, at the top, there is a
      mounting tab. It comes horizontally out of the back of
      the base and then takes a 90o bend up. This tab fits
      into a slot in the locker door and holds the top of the
      base in place.
        Width: 7/16"
        Length from back of base to bend: 3/16"
        Height from bend to tip: 7/32"
    At the bottom - there is a mounting hole, accessible
      only from the back
        Dia: 5/32"
        Center of hole to center of horizontal portion
          of upper tab: 3-5/16"
  Lift slot
    Height: 1-3/16"
    Width: 7/16"
  Kick-proof hood:
    Width
      At base: 7/16"
      At front: 3/8"
    Height
      At base: 1-27/32"
      At front: 1-5/16"
  Padlock hole dia: 13/32"

Mounting hardware (needed for housing only):
  1 Each LY 8-32 X 1/4" Hex head machine screw