• Print this page
• Email a friend

Material: Steel
Height: 1-1/2"
Width: 1-5/8"
Thickness: 1/16"
Kuckles
  Qty: 5 each:
    Leaf 1: 3
    Leaf 2: 2
  Outside dia: 11/32"
  Height
    Leaf 1: 13/64 (between 3/16" and 7/32")
    Leaf 2: 23/64" (between 11/32" and 3/8")
  Pin dia: 1/8"
Leaves
  Style: Reverse assembled, meaning one leave
    comes underneath, up and around to form a knuckle and the other
    comes over the top, down and around to form a knuckle.
  Leaf 1
    Hole configuration: One mounting hole centered between
      two dimples
    Hole dia: 3/16"
    Dimple
      Dia: 1/8"
      Height off surface: 3/64"
      Dimple to dimple OC: 1"
  Leaf 2
    Hole configuration: One smaller hole in the center and
      two larger holes on each end
    Center hole dia: 13/64" (between 3/16" and 7/32")
    Outside hole dia: 15/64" (between 7/32" and 1/4")
    Hole to hole OC
      Outside hole to center hole: 7/16"
      Outside to outside hole: 7/8"