Don't have an account? Create one!
LCN® Surface Mounted Hold Open Door Magnet with Recessed Armature
Part Number: LCN-1960
$209.21 each
- Ships via UPS/Fedex
LCN 1900 Series electronically controlled door holding magnets are fail safe and hold open until the current is interrupted. The magnets are tri-voltage (24VAC/DC, 120VAC & 12VDC) with 35 lbs. of holding force. The LCN-1960 is surface wall mounted with recessed armature. Available in aluminum finish plastic housing.
This can be wired for 12v, 24v or 120v
This product consists of the following pieces:
Wall side:
- Housing
- Electromagnet & cover
Door side: Door armature assembly with contact plate
Accessories - the following are included for mounting
the door armature:
- Wood screw mounting plate
- Through-bolt mounting plate
Material
Wall side piece
Housing: Cast metal, non-magnetic
Electromagnet: Steel
Cover: Plastic
Door side pieces
Door armature assembly: Cast metal, non-magnetic
Contact plate: Steel
Housing
Thickness: 5/64" (between 1/16" and 3/32")
Width: 2-13/16"
Height: 4-5/8"
Depth, including electromagnet & cover: 2-5/8"
Mounting holes
Qty: 2
Type: 10-32
Hole to hole OC: 2-1/2"
Electromagnet and cover
Electromagnet - cylinder shaped, with only the face exposed
Outside dia: 21/32"
Depth: 1-5/16"
Cover
Thickness: 5/64" (between 1/16" and 3/32")
Width: 2-3/4"
Height: 4-5/8"
Depth:
At top ad bottom: 3/8"
At middle: 13/16"
Including electromagnet: 51/64" (between 25/32" and 13/16")
Overall depth, including motor mounted to the
back of the electromagnet: 2-1/32"
Mounting holes
Qty: 2
Type: Countersunk
Dia: 13/64" (between 3/16" and 7/32")
Hole to hole OC: 2-1/2"
Door armature assembly and contact plate
Door armature assembly
Material: Cast metal, non-magnetic
Height: 2-3/8"
Width: 1-11/16"
Depth: 1-5/8"
Mounting holes
Qty: 2
Type: 1/4-20 Threaded
Hole to hole OC: 1-3/4"
There is a set screw in the side for securing the
armature assembly to the back up plate
Size: 6-32 x 3/8"
Drive: 5/64" Allen
Contact plate
Material: Steel
Dia: 1-7/8"
Thickness: 1/4"
Mounting tab (comes off the back of the to plate at a 'T')
Height: 5/16"
Width: 1"
Depth: 7/8"
From front of plate to mounting hole OC: 7/8"
Accessories: There are mounting plates provided for
wood screw mounting and through-bolt mounting:
Wood screw plate
Material: Steel
Thickness: 5/64" (between 1/16" and 3/32")
Height: 1-5/16"
Width: 1-1/8"
Depth: 15/64" (between 7/32" and 1/4")
Mounting holes
Qty: 2
Dia: 7/32"
Hole to hole OC: 1/2"
Through-bolt plate
Material: Steel
Thickness: 1/16"
Height: 3"
Width: 1
Mounting holes
Qty: 2
Dia: 5/16"
Hole to hole OC: 1-3/4"
This product consists of the following pieces:
Wall side:
- Housing
- Electromagnet & cover
Door side: Door armature assembly with contact plate
Accessories - the following are included for mounting
the door armature:
- Wood screw mounting plate
- Through-bolt mounting plate
Material
Wall side piece
Housing: Cast metal, non-magnetic
Electromagnet: Steel
Cover: Plastic
Door side pieces
Door armature assembly: Cast metal, non-magnetic
Contact plate: Steel
Housing
Thickness: 5/64" (between 1/16" and 3/32")
Width: 2-13/16"
Height: 4-5/8"
Depth, including electromagnet & cover: 2-5/8"
Mounting holes
Qty: 2
Type: 10-32
Hole to hole OC: 2-1/2"
Electromagnet and cover
Electromagnet - cylinder shaped, with only the face exposed
Outside dia: 21/32"
Depth: 1-5/16"
Cover
Thickness: 5/64" (between 1/16" and 3/32")
Width: 2-3/4"
Height: 4-5/8"
Depth:
At top ad bottom: 3/8"
At middle: 13/16"
Including electromagnet: 51/64" (between 25/32" and 13/16")
Overall depth, including motor mounted to the
back of the electromagnet: 2-1/32"
Mounting holes
Qty: 2
Type: Countersunk
Dia: 13/64" (between 3/16" and 7/32")
Hole to hole OC: 2-1/2"
Door armature assembly and contact plate
Door armature assembly
Material: Cast metal, non-magnetic
Height: 2-3/8"
Width: 1-11/16"
Depth: 1-5/8"
Mounting holes
Qty: 2
Type: 1/4-20 Threaded
Hole to hole OC: 1-3/4"
There is a set screw in the side for securing the
armature assembly to the back up plate
Size: 6-32 x 3/8"
Drive: 5/64" Allen
Contact plate
Material: Steel
Dia: 1-7/8"
Thickness: 1/4"
Mounting tab (comes off the back of the to plate at a 'T')
Height: 5/16"
Width: 1"
Depth: 7/8"
From front of plate to mounting hole OC: 7/8"
Accessories: There are mounting plates provided for
wood screw mounting and through-bolt mounting:
Wood screw plate
Material: Steel
Thickness: 5/64" (between 1/16" and 3/32")
Height: 1-5/16"
Width: 1-1/8"
Depth: 15/64" (between 7/32" and 1/4")
Mounting holes
Qty: 2
Dia: 7/32"
Hole to hole OC: 1/2"
Through-bolt plate
Material: Steel
Thickness: 1/16"
Height: 3"
Width: 1
Mounting holes
Qty: 2
Dia: 5/16"
Hole to hole OC: 1-3/4"
NIOSH Approved N95 Harmful Dust Respirator, 20 pack
Part Number: MSA-11006
$17.80/pack
see more products in:
Personal Protection Equipment