Don't have an account? Create one!

Restroom Accessories

Grab Bars

Bobrick Grab Bar, 42", 1-1/2" dia.

Part Number: 9201-42

$34.88 each

In-Stock.Ships via UPS/Fedex

Make sure your restrooms meet ADA requirements with our 9201 series Grab Bars. Bobrick Grab Bars are made from 1-1/2" stainless steel tubing with concealed anchors and fasteners. All grab bars mount 1-1/2" from the wall, support 900 pounds and meet or exceed ADA compliance.

TechNotes

Enlargement

General description: 42" Grab bar
Manufacturer: Bobrick
Shipping information: 3.8 lbs, ships via UPS
Warranty: This is warranted to be free from defects in
  workmanship and material under normal usage service for
  one (1) year from the date of purchase.
See 'Grab Bars' below:
Soap / hand sanitizer dispenser - N/A
  Type of soap it uses:
  Capacity:
  Material:
  Finish/color:
  Size:
  Style/features:
  For use with Antibacterial soap:
  Other items that work with this product:
Toilet tissue dispenser - N/A
  Capacity:
  Material:
  Finish/color:
  Size:
  Style/features:
  Options:
  Replacement items:
Paper towel dispenser - N/A
  Type of towel it holds:
  Capacity:
  Material:
  Finish/color:
  Size:
  Style/features:
  Other items that work with this product:
Sanitary napkin receptacle/dispenser - N/A
  Capacity:
  Material:
  Finish/color:
  Size:
  Style/features:
  Options:
  Other items that work with this product:
Mirrors - N/A
  Material:
  Size:
  Style/features:
  Mounting style:
  Options:
Shelves - N/A
  Material:
  Finish:
  Size:
  Style/features:
  Options:
Grab bars
  Bar style: Straight; concealed mounting with snap flange
  Mounting style: Concealed mounting flange with screw holes
    for concealed anchors
  Material: All stainless steel
  Finish: Satin
  Size
    Bar
      Length
        From center to center of mounting plates: 42"
        From end to end of snap flanges: 45-1/4"
      Inside space
        Length: 40-3/8"
        Depth: 1-1/2"
      Dia: 1-1/2"
    Mounting plate - flat on side, rounded on each end
      Width: 1-31/32"
      Length, at center: 3-1/8"
      Thickness: 1/8"
    Snap flange
      Outside dia: 3-1/4"
      Height: 19/32"
      Thickness: 1/32", 22 gauge
  Options - call for pricing:
  - Other lengths in this style include 12", 18", 24", 30", 36"
    and 48"
  - Peened, nonslip gripping surface - add suffix .99 to model number
  - 251-4 Wingit Grab bar fastener for installing grab bars to walls
    that have no backing. It is used for 2-1/2" and 3-1/2" or deeper
    hollow walls with finished wall surfaces 1/4" to 1-1/2" thick.
    Can also be used on 1/2" thick drywall with added finished wall
    material. Supports 300 lb load.
  - B-6106 Series: straight style, exposed mounting, 1-1/2" dia bar
  - B-5806 Series: straight style, concealed mounting 1-1/4" dia bar
  ADA Guidelines:
  - Grab bar diameter should be 1-1/4" to 1-1/2" with 1-1/2" clearance
    from the wall
  - Grab bars should not rotate in their fittings
  - The required mounting height is universally 33" to 36" from the
    centerline of the grab bar to the finished floor.
  - The structural strength of all grab bars and their mounting
    devices should withstand more than 250 lbs of force (1112N)
  - For all Barrier-Free toilet compartments, individual toilet rooms
    and guest bathrooms, it is recommended that a 36" minimum
    horizontal grab bar be installed on the back wall over the toilet
    and a 42" minimum horizontal grab bar be installed on the
    side wall or partition nearest the toilet. This can also be
    accomplished with a single horizontal two-wall grab bar
    (B-68137 - comes with concealed mounting and peened surface).
Baby changing station - N/A
  Weight capacity:
  Material:
  Finish/color:
  Size:
  Style:
  Options:
  Replacement items:
Air fresh gel dispenser and accessories - N/A
  Source of power:
  Material:
  Color:
  Hardware:
  Features:
  Scents
    Form:
    Weight:
    Pack cube/ft:
    Duration of odor control:
    Scent options:
Miscellaneous - N/A
  Item:
  Material:
  Size:
  Features:
  Options: